The Home Control Electricity Measuring module allows the resident to measure the production of 1 switching circuit or 1 phase.The total electricity use of a one phased house can be measured with this module!Current measured with current clampfor 3 phase installations, use 3 channel measuring module!
With the Home Control measuring module (3 channel) the resident can measure 3 different circuits, or the overall power consumption on a 3 phased installation.For a single phased house, use the 1 channel measuring module
Niko home Control 3fold switching module is suitable for switching 3 circuits of your home control installation.These circuits can be lights or plugs.By pushing the push buttons, you can control the 3 circuits by hand.The module has also 3 feedback leds and 1 status ledBistable relays will ensure a low energy consumption.
Niko home Control 6 fold switching module is suitable for switching 6 circuits of your home control installation.These circuits can be lights or plugs.By pushing the push buttons, you can control the 3 circuits by hand.The module has also 3 feedback leds and 1 status ledBistable relays will ensure a low energy consumption.
The universal dimming module has 2 channels to dim lights.Dimming power is 400VA at 45 degrees celcius and 500VA at 35 degrees
Suitable for dimming: incandescent lamps, halogen lamps (230V or 12V) and dimmable LED lampsMinimum capacity 10VAMinimum light level can be adjusted by using a small screwdriver
With the niko Home Control Ventilation module, you can control the central ventilation unit with your domotics instllation.You connect the module instead of the 3 - way switch.After you connected the module u can program it so that ventilation goes higher when you use bathroom or toilet.
You can connect up to 3 sensor on this module, sensors using NPN or NO contact.The connected sensors used should be of the safety extra-low voltage (SELV) type.
Typical sensors are: smoke detectors, alarm installations, motion detectors, ..